Administrative |
|
Supervising Business Mail Entry Function (1760104)
|
$1750 |
$1850 |
| The course provides a comprehensive overview for any Business Mail Entry Supervisors or other EAS employees who supervise clerks who accept business mailings. The student will receive training in the administration, acceptance, verification of FCM, STD mail, Periodicals mailings,MERLIN, and daily operations. |
|
Teamwork and Diversity (1560121)
|
$325 |
$350 |
| To provide participants with teamwork and diversity skills to enhance classroom instruction. This course is designed for participants to familiarize themselves with teamwork and diversity through ''hands-on'' and experiential approach. Instruction will focus on group/team development, communication styles, leadership styles, goal setting, personal challenge, and the dynamics of diversity. Problem solving and recognition of the value of a diverse work team will be emphasized throughout. |
Automotive |
|
Accident Invest Involving Private Party (4060104)
|
$2175 |
$2300 |
| Accident Investigation course which educates participants on the importance of proper investigations on scenes where a Tort Claim may be filed. |
|
Air Brakes (5561910)
|
$1425 |
$1500 |
| The course covers the common tasks that a technician would encounter in air brake and air starter service. Successful completion of this course will qualify the student as a ''Brake Inspector'' as defined in D.O.T. Regulations (49 CFR, Sec. 396.35). Content includes
Brake safety regulations
Hazardous waste regulations
Heat effects of asbestos
Proper work practices are introduced |
|
Automotive Electrical (5562505)
|
$1500 |
$1575 |
| This course covers DC electrical troubleshooting using a multimeter, in preparation for all types of electrical faults. Also covered are
Schematic tracing
Relay circuit troubleshooting
All LLV circuit excluding the computer
Safety
Combustion and fires |
|
Mack Tractor Maintenance (SAP0333)
|
Call |
Call
|
| Please see long description above. |
|
Maintenance Welding Technology (5560273)
|
$3475 |
$3650 |
| This course combines, for ease of scheduling students, the following three courses:
Oxy-acetylene and plasma welding and cutting course number 5560275
Shielded Metal Arc Welding (ARC) course 5560274
Gas Metal Arc Welding (MIG) course 5560276
Bundling the course provides sites the ability to schedule a student for a comprehensive welding course in which they learn Oxy-acetylene, Arc, and MIG welding all within one trip. This allows office to save on travel expenses. |
|
Natural Gas Vehicle Maintenance (5562421)
|
$1700 |
$1800 |
| Students learn the needed skills to safely handle and perform proper filling procedures, properly diagnose, adjust and repair specific natural gas system(s) used in the postal fleet. Emission testing and evaluation will be emphasized to make sure each vehicle (LLV) that comes in for inspection and/or repair is operating within EPA specifications. CNG cylinder inspection is also covered in this course. |
|
On-Board Diagnostics (OBD-II) (5560168)
|
$1200 |
$1275 |
| This course covers principles of operation on the computer controlled engine and emission systems found in 1997 through 2000 OBD II vehicles. Course content includes troubleshooting, servicing and repairing electronic systems circuits and components, use and interpretation of test equipment, analyzing engine performance, and driveability diagnosis. |
|
Vehicle Air Conditioning Systems (4360119)
|
$1650 |
$1725 |
| Introduction to repairs and procedures used in servicing vehicle A/C systems. |
|
Vehicle Collision Repair Techniques (5561601)
|
$1650 |
$1750 |
| This course covers the technical area of vehicle collision repair. Topics include
Proper use of body fasteners and sealant
Fundamentals of aluminum body construction and repair
Preparing surfaces for repaint
Repairing fiberglass-reinforced plywood (FRP)
EPA laws concerning repair procedures |
Building Systems and Industrial Maintenance |
|
Airborne Ultrasound - Level 1 (5566114)
|
$1475 |
$1550 |
| Instruction covers the theory, principles and practical applications of Airborne Ultrasound conforming to the American Society of Non-Destructive Testing (ASNT) for level 1 certification standards. |
|
Building Systems for Supervisors (5560129)
|
$1000 |
$1050 |
| This course provides an overview of the technical skills required in the areas of building and building equipment maintenance and operation. Emphasis is placed on: Safety, National Electrical Code, Elevators, Building Controls, Roofs, Small and Large Heating Systems, Small and Large Cooling Systems, Roof Top HVAC, Heat pumps, EPA Considerations and Responsibilities, Preventive, Predictive, and Breakdown Maintenance. |
|
Cimplicity Basics (5560259)
|
$1925 |
$2025 |
| An introduction to basic Cimplicity HMI software. |
|
Conduit Bending and Installation (5568709)
|
$1325 |
$1400 |
| The Industrial Electrical Service (IES) team is offering this class which will focus primarily on NEC compliance, job planning, bending, installing and safety as it applies to thin-wall conduit or EMT. |
|
Elevator Equipment Seminar (5560346)
|
$1225 |
$1300 |
| Provides training for supervisors and managers with responsibility for directing or overseeing maintenance on elevator systems with the basic technology, maintenance, code and inspection requirements for elevators. |
|
Elevator Maintenance Electric Traction (5568804)
|
$2400 |
$2525 |
| The course covers operation, preventive and corrective maintenance, and troubleshooting electric traction elevators. Topics include
Interpretation of schematics and wiring diagrams
Mechanical and electrical troubleshooting diagnostic
procedures
Interpretation and application of the Elevator Safety Code ANSI A17.1
Safe working practices |
|
Elevator Maintenance Hydraulic (5568805)
|
$2400 |
$2525 |
| The course covers operation, preventive and corrective maintenance, and troubleshooting hydraulic elevators. Topics include
Interpretation of schematics and wiring diagrams
Troubleshooting diagnostic procedures
Interpretation and application of the Elevator Safety Code ANSI A17.1
Safe working practices |
|
Elevator Print Reading & Troubleshooting (2360107)
|
$2100 |
$2250 |
| This course teaches students to develop flowcharts using elevator electrical schematics, accurately identify symptoms based on elevator response to student initated calls, and isolate malfunctioning component. |
|
Elevator Relay Logic Trblshting ET-XTNL (SAP0308)
|
Call |
Call
|
| This resident course is designed to provide elevator maintenance personnel with a systematic, method to accurately identify system malfunctions and efficiently analyze control circuitry to pinpoint the exact source of the problem. Topics include electrical schematic component identification, controller operation and field wiring, selector operation, flowcharting and application. This course includes lecture, group discussion, handouts, paper bugs designed to enhance critical thinking, and practical application of the troubleshooting process. |
|
Elevator Relay Logic Troubleshooting Hyd (SAP0307)
|
Call |
Call
|
| This resident course is designed to provide elevator maintenance personnel with a systematic, method to accurately identify system malfunctions and efficiently analyze control circuitry to pinpoint the exact source of the problem. Topics include electrical schematic component identification, controller operation and field wiring, selector operation, flowcharting and application. This course includes lecture, group discussion, handouts, paper bugs designed to enhance critical thinking, and practical application of the troubleshooting process. |
|
Environmental Control I (5568601)
|
$2525 |
$2675 |
| Instruction covers the operation and maintenance of smaller tonnage HVAC systems, including troubleshooting and repair of air conditioning and heating systems. Subjects include direct expansion systems, reciprocating compressors, electrical controls, and forced air and direct fired heating systems. Both preventive and corrective maintenance procedures are included with 50 percent of time devoted to classroom and 50 percent to lab, with special emphasis on energy conservation and safety. |
|
Environmental Control III (5568905)
|
$1575 |
$1675 |
| Participants who perform maintenance on HVAC heating systems will benefit from this course covering operation, maintenance and troubleshooting facility heating systems. Topics include
Steel fire tube and cast iron boilers
Natural gas and/or oil fired burners
Fuel trains
Electric and gas infrared heat
Warm air furnaces
Safety |
|
Environmental Control IV (5568908)
|
$2675 |
$2825 |
| The course covers operation, maintenance, and troubleshooting on large tonnage refrigeration equipment for summer air conditioning. Topics include
Day-to-day operation
Seasonal procedures
Condensers, evaporators, metering devices, and other specialized devices.
Compressors
Water treatment testing
Safety and energy conservation |
|
Heat Pump Operation and Maintenance (5560271)
|
$2350 |
$2475 |
| Operation, maintenance, troubleshooting, and service on heat pumps. The proper day-to-day operation as well as correct seasonal changeover, lay-up and start-up procedures are presented for heat pumps, special operation and maintenance considerations for condensers, evaporators, metering devices, 4-way valves, controls and other specialized devices. System malfunction analysis procedures and techniques are presented. Safety and energy conservation are covered throughout the program. Methods of troubleshooting, unit electrical power, air distribution, and control systems using electromechanical and solid state control are emphasized. Techniques for determining efficency. |
|
Hydraulic and Pneumatic Fundamentals (5560191)
|
$1825 |
$1925 |
| An intensive hands-on resident course using industrial components. Students study basic theory, learn to read the unique symbols and circuit diagrams, and how to safely handle adjustments and replacements in hydraulic and pneumatic sub-systems. Class days begin with a daily review, activities, and/or a question and answer session. Then students study at individual computer stations to learn new material in a self-paced CDROM format. Students may repeat areas of study as they see fit. Computer simulations, video tapes, reference books, and individual tutoring support the material. Afternoon lab sessions involving extensive hands-on also support the studies.
Contacts: Ron Nicholson 405-366-4622; Sue Ramos 405-366-4643. |
|
Industrial Electrical Service (IES) (5568705)
|
$2400 |
$2525 |
| The course applies the principles of electricity up to 480 volts, alternating current (AC), transformers, motors, motor controls, and wiring methods. Topics include
Installation, troubleshooting, repair and preventive maintenance of building electrical and basic conveyor motor control systems
Electrical and mechanical safety
National Electrical Code |
|
Infrared Thermography - Level 1 USPS (SAP0138)
|
$2100 |
$2350 |
| Instruction covers theory and practical applications of Infrared Thermography compliant with American Society of Non-Destructive Testing (ASNT) level 1 certification standards. Training includes instructor led classroom lecture and discussions along with instructor led and open participation student investigative labs. |
|
Maintenance Welding Technology (5560273)
|
$3475 |
$3650 |
| This course combines, for ease of scheduling students, the following three courses:
Oxy-acetylene and plasma welding and cutting course number 5560275
Shielded Metal Arc Welding (ARC) course 5560274
Gas Metal Arc Welding (MIG) course 5560276
Bundling the course provides sites the ability to schedule a student for a comprehensive welding course in which they learn Oxy-acetylene, Arc, and MIG welding all within one trip. This allows office to save on travel expenses. |
|
Mechanic Skills Training (5560222)
|
$3500 |
$3675 |
| Students will learn tools, tool safety, measuring device, technical drawings, gears, pulleys and bearings, power transmissions and leave the course with enhanced maintenance (for mechanics) knowledge, skills and abilities (KSAs). |
|
National Electrical Code (5560197)
|
$775 |
$825 |
| This course provides knowledge and understanding of
the National Electrical Code as it applies to maintenance in the USPS. |
|
Refrigerant Trng Cert Test (5560300)
|
$475 |
$500 |
| The course covers EPA regulatory requirements and environmental concerns related to refrigerant management and ozone protection issues. Content includes
Federal laws and regulations affecting the decision-making process
Clean Air Act
OSHA and USPS regulations
Stratospheric Ozone Protection Amendment of 40 CFR |
|
Rooftop HVAC (5560260)
|
$1775 |
$1875 |
| Operation, maintenance, troubleshooting, and service on roof top units (RTUs). The proper day-to-day operation, lay-up and start-up procedures are presented for RTUs, special operation and maintenance considerations for condensers, evaporators, metering devices, economizers, controls and other specialized devices. System malfunction analysis procedures and techniques are presented. Safety and energy conservation are covered throughout the program. Methods of troubleshooting, unit electrical power, and control systems using electromechanical and solid state control are emphasized. |
Bulk Mail Systems |
|
APPS Mechanical Sys Delta Course Part 2 (5560435)
|
$2525 |
$2675 |
| This course is for those students who have successfully completed the APPS Mechanical Systems Course 55652-50 (Inactive) and who are required to attend APPS Phase 3 55604-16 training. |
|
Auditing Business Mail Entry (Field) (5760123)
|
Call |
Call
|
| Auditing Business Mail Entry is designed to provide the necessary background for those engaged in auditing Business Mail Entry Units. Topics include basics of Business Mail, PostalOne!, Nonprofit, Special Postage Payment Systems, MERLIN Reports, (tracking and reconciliation of finanical data), Periodicals (Authorizations, revocations, revenue deficiencies, CPP & CAPS, measuring advertising, annual reviews, responsibilities of original and additional entry offices.) |
|
Bulk Mail Conveyor Controls (5566613)
|
$2000 |
$2100 |
| Provides training in the relationship between CPU, input modules, output modules, input devices, output devices, and the ladder logic program for the Allen-Bradley SLC 500 family of Programmable Logic Controllers. Emphasizes fault isolation techniques to troubleshoot to the field replaceable unit utilizing RSLogix500 on-line monitoring of the PLC and diagnostic test equipment. How to install, configure, and calibrate the Allen-Bradley Smart Motor Controller and VFD in a remote I/O environment. |
|
Business Acceptance for AO Field Trainer (5760137)
|
$150 |
$175 |
| This course is administered by an NCED certified professional instructor or postal training specialist. |
|
Cimplicity Basics (5560259)
|
$1925 |
$2025 |
| An introduction to basic Cimplicity HMI software. |
|
Executive Mail Center Manager-XTNL (5760107)
|
$975 |
$1025 |
| The Executive Mail Center Manager course is for an individual who wishes to emphasize their professionalism in Mail Center Management.This course covers nine key operational areas,People Management, Sales and Marketing, Managing Mail Center Operations, Managing Mail Center Finances, Mail Center Safety and Security, Planning and Managing Technology, Plans and Policymaking, Resource Planning and Quality Management. |
|
Maint & Tblshooting AB Logix500 Ctrl Sys (5560432)
|
$2075 |
$2200 |
| Provides the skills essential to maintaining quality performance of Allen-Bradley Logix500 control systems, and restoring malfunctioning platforms to operational status with minimal down time and resources. Techniques also include optimizing or modifying system performance to accommodate the variations between facility necessities. |
|
Supervising Business Mail Entry Function (1760104)
|
$1750 |
$1850 |
| The course provides a comprehensive overview for any Business Mail Entry Supervisors or other EAS employees who supervise clerks who accept business mailings. The student will receive training in the administration, acceptance, verification of FCM, STD mail, Periodicals mailings,MERLIN, and daily operations. |
Business Mail Academy |
|
Auditing Business Mail Entry (Field) (5760123)
|
Call |
Call
|
| Auditing Business Mail Entry is designed to provide the necessary background for those engaged in auditing Business Mail Entry Units. Topics include basics of Business Mail, PostalOne!, Nonprofit, Special Postage Payment Systems, MERLIN Reports, (tracking and reconciliation of finanical data), Periodicals (Authorizations, revocations, revenue deficiencies, CPP & CAPS, measuring advertising, annual reviews, responsibilities of original and additional entry offices.) |
|
Business Mail Academy Shape Based (5760130)
|
$1750 |
$1850 |
| Classroom and lab course designed to enable a new Business Mail employee to perform their duties at a minimally acceptable level |
|
Business Mail Analyst/Specialist (5760124)
|
$900 |
$950 |
| This course is a comprehensive overview of the mission and purpose of Business Mail Acceptance including the Channel Plan. Roles and responsibilities of the Analyst and Specialist are defined. Topics include the following:
Special Mailer Programs
PostalOne!
Audit Procedures
Automation Compatibility
MERLIN
Value-Based Management
Rulings, Exceptions, and Appeals
Nonprofit
Periodicals
New Initiatives
The student will also receive training in soft skills such as listening, conflict resolution, problem employees, speaking, and presentations. |
|
Business Mail Entry Auditing (5760118)
|
$1025 |
$1100 |
| Auditing Business Mail Entry is designed to provide the necessary background for those engaged in auditing Business Mail Entry Units. Topics include Basics of Business Mail, PostalOne!, Nonprofit, Special Postage Payment Systems, MERLIN Reports, Tracking and reconciliation of financial data Periodicals Authorizations, revocations, revenue deficiencies, CPP & CAPS, measuring advertising, annual reviews, responsibilities of original and additional entry offices. |
|
Executive Mail Center Manager, PCC-XTNL (5760126)
|
$1025 |
$1075 |
| The Executive Mail Center Manager course is for an individual who wishes to emphasize their professionalism in Mail Center Management. This course will give students guidance that will boost productivity, increase efficiency, maximize leading-edge technology and enhance results for their department and company. This course covers nine key operational areas, People Management, Sales and Marketing, Managing Mail Center Operations, Managing Mail Center Finances, Mail Center Safety and Security, Planning and Managing Technology, Tool and resources, and Quality Management. |
|
Executive Mail Center Manager-XTNL (5760107)
|
$975 |
$1025 |
| The Executive Mail Center Manager course is for an individual who wishes to emphasize their professionalism in Mail Center Management.This course covers nine key operational areas,People Management, Sales and Marketing, Managing Mail Center Operations, Managing Mail Center Finances, Mail Center Safety and Security, Planning and Managing Technology, Plans and Policymaking, Resource Planning and Quality Management. |
|
Mail Design Professional -FLD (5760121)
|
$475 |
$500 |
| The Mail Design Professional (MDP) couurse provides in depth training on postal standards related to designing letter and flat mail to facilitate processing on high-speed automated equipment while maximizing cost effectiveness and reducing processing delays. The MDP course includes:
-Mailability
-Processing Categories
-Classes of Mail
-Addressing
-Ancillary Service Endorsements
-Move Update
-Machine Mail
-Nonmachine Criteria
-POSTNET Barcodes
-PLANET Code Barcodes
-Parcel Barcodes
-Automation Letters
-Automation Flats
-MERLIN Reports
-Extra Services
-Reply Mail
-MDA Evaluation Tools
-Web Site Navigation Tools |
|
Mail Design Professional Pos Emp(Field) (5760122)
|
Call |
Call
|
| The Mail Design Professional (MDP) course is for Postal Employees who desire to enhance their professionalism and maximize their proficiency in designing letter and flat mail to meet USPS standards. |
|
Mailpiece Design Analyst (5760131)
|
$1425 |
$1500 |
| The Mailpiece Design Analyst (MDA) course is for Postal employees who desire to enhance their professionalism and maximize their proficiency in designing mailpieces to meet USPS standards. |
|
Mailpiece Design Professional (Res)-XTNL (5760135)
|
$800 |
$825 |
| The MDP course includes the following topics:
basic addressing, forwarding and related services, PARS, machinable and non-machinable criteria, barcoding formats and specifications, designing automation letters, designing automation flats, mail processing equipment, MERLIN reports, design of special service labels, reply mail, and USPS evaluation tools. |
|
Periodicals Postal Employees-FLD (5760120)
|
$475 |
$500 |
| Provides training in the administration, acceptance, verification of periodicals mailings. Topics include basis elements and categories, advertising, statements of ownership, publisher records, mailpiece construction, preparation & sortation standards, documentation, accounting procedures (POSTALONE!), and a verification checklist. |
|
Periodicals Professional (5760105)
|
$900 |
$950 |
| This course is for Mailing Customers who mail Periodicals or would like to start
mailing Periodicals. The course is 3 days of instruction and labs. The course provides training in the administration, acceptance, verification of periodicals mailings. Topics include basis elements and categories, advertising, statements of ownership, publisher records, mailpiece construction, preparation & sortation standards, documentation, accounting procedures, and a verification checklist. |
Communication |
|
ControlNet Communications (5560431)
|
$900 |
$950 |
| This course provides the skills needed to design, configure, and troubleshoot ControlNet networks. The course will utilize RSNetworx for ControlNet software, RSLinx software and RSLogix 5000 software. |
|
DeviceNet Communications (5560430)
|
$875 |
$925 |
| This course provides the skills needed to design, configure, and troubleshoot DeviceNet networks. The course will utilize RSNetworx for DeviceNet software and RSLinx Software. |
|
Teamwork Through Leadership (1160156)
|
$100 |
$125 |
| This program is designed to refine courage and creativity in your organization's environment with principles ranging from Conflict Resolution to custom designed Change Management. Let our experienced Certified Training Facilitators, based on your needs, help design strategies to implement in your organization. We frame the activities in context of your mission to affect the desired change within your group or organization.
For all external customers an NCED waiver must be signed on property.
Course fee is set at minimum regardless of final session length. Session can range from greater than 4 hours to less than or equal to 8 hours. |
|
Teamwork and Communication (1660101)
|
$75 |
$100 |
| This program is designed to refine courage and creativity in your organization's environment with principles ranging from Conflict Resolution to custom designed Change Management. Let our experienced Certified Training Facilitators, based on your needs, help design strategies to implement in your organization. We frame the activities in context of your mission to affect the desired change within your group or organization.
For all external customers an NCED waiver must be signed on property.
Course fee is set at minimum regardless of final session length. Session can range from greater than 1 hour to less than or equal to 4 hours. |
Environmental |
|
Hazardous Waste Mgmt & Release Reporting (1960117)
|
$400 |
$425 |
| Hazardous Waste Management covers the key regulatory requirements and additional technical information necessary to effectively manage hazardous waste generated at a Postal Facility. The course also addresses regulatory requirements and Postal policies for reporting releases of hazardous and regulated substances. Classroom lecture, discussion, and learning exercises guide the participant through the Hazardous Waste Mangement process. |
Fundamental Maintenance Skills |
|
A+ Computer Fundamentals (3260143)
|
$1225 |
$1300 |
| This course uses CompTIA A+ training materials to prepare the student with the knowledge and skills necessary to become proficient in core computer principles for both hardware components and operating systems. This course is beneficial for any postal maintenance or information systems personnel involved with the installation, upgrade, and troubleshooting of microcomputer (PC) hardware and operating system software. |
|
Airborne Ultrasound - Level 1 (5566114)
|
$1475 |
$1550 |
| Instruction covers the theory, principles and practical applications of Airborne Ultrasound conforming to the American Society of Non-Destructive Testing (ASNT) for level 1 certification standards. |
|
Analytical Troubleshooting (5560421)
|
$2700 |
$2850 |
| ATS is an entry level course designed to teach logical troubleshooting theory and skills that are transferable to all types of postal equipment. |
|
Building Services Methodology FT (BSMFT) (1760299)
|
$1500 |
$1575 |
| The Building Service's Train-The-Trainer course is a comprehensive, official, directive driven course designed to enable students to provide building services personnel with the knowledge, skills, and abilities to perform their duties. |
|
Electronics Technology Training (5560251)
|
$2625 |
$2775 |
| Designed to provide a foundational understanding of electronics theory and provide hands on experiments and troubleshooting to reinforce student comprehension. |
|
Fundamental Maintenance Skills (5560192)
|
$2725 |
$2875 |
| The Fundamental Maintenance Skills course covers basic concepts such as digital gates, octal and hex numbering systems, basic computer concepts, soldering techniques, test equipment (meters, oscilloscopes), troubleshooting AC and DC Power distribution, motor control, and solid state circuits. |
|
Hydraulic and Pneumatic Fundamentals (5560191)
|
$1825 |
$1925 |
| An intensive hands-on resident course using industrial components. Students study basic theory, learn to read the unique symbols and circuit diagrams, and how to safely handle adjustments and replacements in hydraulic and pneumatic sub-systems. Class days begin with a daily review, activities, and/or a question and answer session. Then students study at individual computer stations to learn new material in a self-paced CDROM format. Students may repeat areas of study as they see fit. Computer simulations, video tapes, reference books, and individual tutoring support the material. Afternoon lab sessions involving extensive hands-on also support the studies.
Contacts: Ron Nicholson 405-366-4622; Sue Ramos 405-366-4643. |
|
Industrial Electrical Service (IES) (5568705)
|
$2400 |
$2525 |
| The course applies the principles of electricity up to 480 volts, alternating current (AC), transformers, motors, motor controls, and wiring methods. Topics include
Installation, troubleshooting, repair and preventive maintenance of building electrical and basic conveyor motor control systems
Electrical and mechanical safety
National Electrical Code |
|
MPI Cabling - Copper and Fiber Optic (5560439)
|
$2175 |
$2275 |
| At the current life-cycle stage of the Mail Processing Infrastructure (MPI) network, the one year warranty on the cabling installation performed under the contract has expired. The benefit of having trained staff provides sites with the necessary skilled maintenance personnel to make timely and reliable repairs to the current MPI cabling and perform retrofits that support the future growth of the MPI.
According to MMO 086-08: Work performed on the infrastructure fiber or copper cabling and related components shall only be performed by technicians who have successfully completed NCED CAT-6 training, or possess CAT-6 certification. Sites not possessing personnel with either of these requirements are encouraged to seek infrastructure installation services from outside service providers. |
|
MPI Cabling - E-learning Prereq-WBT (5660105)
|
Call |
Call
|
| This course is a pre-requisite for the MPI Cabling Combined Copper and Fiber Optic resident course. The USPS relies on the (MPI) to provide timely, reliable and accurate mail processing. The physical growth and convergence of new equipment and technology into the (MPI) network is making it increasingly important for field technicians to have the knowledge of cabling components and the skills necessary to maintain the system. Refer to MMO 086-08 |
|
Maintenance Welding Technology (5560273)
|
$3475 |
$3650 |
| This course combines, for ease of scheduling students, the following three courses:
Oxy-acetylene and plasma welding and cutting course number 5560275
Shielded Metal Arc Welding (ARC) course 5560274
Gas Metal Arc Welding (MIG) course 5560276
Bundling the course provides sites the ability to schedule a student for a comprehensive welding course in which they learn Oxy-acetylene, Arc, and MIG welding all within one trip. This allows office to save on travel expenses. |
|
Mechanic Skills Training (5560222)
|
$3500 |
$3675 |
| Students will learn tools, tool safety, measuring device, technical drawings, gears, pulleys and bearings, power transmissions and leave the course with enhanced maintenance (for mechanics) knowledge, skills and abilities (KSAs). |
|
Network Troubleshooting Basics (5560227)
|
$925 |
$975 |
| Network Troubleshooting Basics is specifically designed for individuals with little or no networking experience that want hands-on experience identifying network problems, evaluating solutions and making repairs.
This course uses several common operating systems: Windows 2000 and Windows XP. Participants will use a network map, ping utility, check software configurations, use cable testers and identify hardware problems. Recommended Prerequisite: A+ Computer Fundamentals 32601-43 |
|
Network+ (5560167)
|
$1950 |
$2050 |
| This course uses CompTIA Network+ training materials to introduce the student to networking principles and lays the foundation for core networking concepts. The program is very beneficial for any postal maintenance or information systems personnel involved with network installation, maintenance, and troubleshooting.
This course is complementary to NTB 5560227 which provides more hands-on training identifying network problems, evaluating solutions and making repairs.
Recommended Prerequisite: A+ Computer Fundamentals 3260143 |
Human Resources |
|
Injury Compensation Course - Supervisor/IOD Contro (3720101)
|
Call |
Call
|
| The safety and health of employees is our primary responsibility. However, after an accident/ incident and subsequent injury or exposure has occurred, active involvement and claims management at all levels are paramount. You will learn the role of the supervisor and Injury Compensation (IC) Control Point in the event that an employee suffers a work related traumatic injury or occupational disease. You will learn about the documents used in the management kit and understand the responsibility of the supervisor and IC Control point when notified of an employees injury, occupational disease or medical condition. |
Hydraulics and Pneumatics |
|
GEFCO Speedstar 185 Training (FLD)-XTNL (1160232)
|
Call |
Call
|
| N/A |
|
GEFCO Speedstar 185 Training (Res)-XTNL (1160231)
|
Call |
Call
|
| N/A |
|
Hydraulic and Pneumatic Fundamentals (5560191)
|
$1825 |
$1925 |
| An intensive hands-on resident course using industrial components. Students study basic theory, learn to read the unique symbols and circuit diagrams, and how to safely handle adjustments and replacements in hydraulic and pneumatic sub-systems. Class days begin with a daily review, activities, and/or a question and answer session. Then students study at individual computer stations to learn new material in a self-paced CDROM format. Students may repeat areas of study as they see fit. Computer simulations, video tapes, reference books, and individual tutoring support the material. Afternoon lab sessions involving extensive hands-on also support the studies.
Contacts: Ron Nicholson 405-366-4622; Sue Ramos 405-366-4643. |
|
Hydraulics Seminar-XTNL (5560427)
|
$1800 |
$1875 |
| The Hydraulic Seminar will consist of 2 days of basic hydraulic theory and customer specific equipment training. |
Law |
|
Electrical Standards (OSHA 3095) (1960184)
|
$975 |
$1025 |
| This course is designed to provide the student with a survey of OSHA's electrical
standards and the hazards associated with electrical installations and equipment.
Topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, hazardous locations, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA inspection procedures. Hands-on training is provided using various types of electrical testing equipment. 2.5 CEUs; 3.5 CMs |
|
Machinery and Machine Guarding Stand (1960185)
|
$1025 |
$1100 |
| This course will introduce students to various types of common machinery and related
safety standards. Students will be able to recognize hazards created by
points of operation, rotating parts, flying chips and sparks, and alternatives to
achieve abatement. 2.5 CEUs; 3.5 CMs |
|
OSHA 501 (1960183)
|
$1025 |
$1100 |
| This course is designed to present detailed information on how the
provisions of the OSH Act may be implemented in the workplace. Rights and responsibilities under the OSH Act, the appeals process, and record keeping are covered. OSHA's general industry standards and an overview of the requirements of the most frequently referenced standards will also be addressed. Upon successful completion of this course, graduates are authorized to conduct both a 10-hour and 30-hour Voluntary Compliance course and to issue cards to participants certifying course completion. |
Mail Processing Equipment |
|
AFSM100 Flats Sorting Machine MPE -FLD (SAP0202)
|
$1950 |
Call
|
| Units of instruction include Safety, Preventive Maintenance routines, Alignments and Adjustments, Power Distribution, System Diagnostics, Fault Isolation Techniques, and System troubleshooting, to include the FICS Module with Labeler, and Mail Flow through the FICS module. |
|
APPS Mechanical Sys Delta Course Part 2 (5560435)
|
$2525 |
$2675 |
| This course is for those students who have successfully completed the APPS Mechanical Systems Course 55652-50 (Inactive) and who are required to attend APPS Phase 3 55604-16 training. |
|
MERLIN Maintenance (5560419)
|
$1550 |
$1650 |
| This course provides a comprehensive overview of the ''Mailing Evaluation, Readability, and Lookup Instrument'' (MERLIN) as it relates to ''Bulk Mail Entry Unit'' (BMEU) operations. |
|
MPI Cabling - Copper and Fiber Optic (5560439)
|
$2175 |
$2275 |
| At the current life-cycle stage of the Mail Processing Infrastructure (MPI) network, the one year warranty on the cabling installation performed under the contract has expired. The benefit of having trained staff provides sites with the necessary skilled maintenance personnel to make timely and reliable repairs to the current MPI cabling and perform retrofits that support the future growth of the MPI.
According to MMO 086-08: Work performed on the infrastructure fiber or copper cabling and related components shall only be performed by technicians who have successfully completed NCED CAT-6 training, or possess CAT-6 certification. Sites not possessing personnel with either of these requirements are encouraged to seek infrastructure installation services from outside service providers. |
|
MPI Cabling - E-learning Prereq-WBT (5660105)
|
Call |
Call
|
| This course is a pre-requisite for the MPI Cabling Combined Copper and Fiber Optic resident course. The USPS relies on the (MPI) to provide timely, reliable and accurate mail processing. The physical growth and convergence of new equipment and technology into the (MPI) network is making it increasingly important for field technicians to have the knowledge of cabling components and the skills necessary to maintain the system. Refer to MMO 086-08 |
|
Machinery and Machine Guarding Stand (1960185)
|
$1025 |
$1100 |
| This course will introduce students to various types of common machinery and related
safety standards. Students will be able to recognize hazards created by
points of operation, rotating parts, flying chips and sparks, and alternatives to
achieve abatement. 2.5 CEUs; 3.5 CMs |
|
Maint & Troubleshooting AB Logix5000 (5560342)
|
$2275 |
$2400 |
| Comprehensive training which encompasses the ControlLogix Platform, a collection of Allen-Bradley's most powerful and flexible Programmable Logic Controllers. The course provides detailed hands-on training, to include:
-Hardware specifications, requirements, installation, configuration, maintenance, and troubleshooting.
-Software operation, management, modification, and analysis.
-Communications operation, management, and diagnosis.
The course provides students with the skills essential to maintaining, restoring, optizing, and modifying Allen-Bradley ControlLogix or Allen-Bradley CompactLogix systems with minimal down time and resources. |
|
PC 70/80 Ink Jet Printer (5566043)
|
$950 |
$1000 |
| The course covers maintenance aspects of the PC 70/80 Ink Jet Printer. Topics include
Theory of operation
Power distribution
Ink flow
Printhead calibration and alignments
Preventive maintenance
System level fault isolation techniques |
Maintenance Administration |
|
Certified Maint Reliability Prof exam (5560309)
|
$650 |
$700 |
| Exam for Society of Maint Reliability Professional for Certification as a Maint Reliability Professional CMRP |
|
LINUX Fundamentals (5560281)
|
$1950 |
$2050 |
| This course is designed to provide the skills needed to gain a thorough understanding of the installation, maintenance and troubleshooting procedures required to administer the LINUX Operating System environment. |
Management and Supervision |
|
Certified Maint Reliability Prof exam (5560309)
|
$650 |
$700 |
| Exam for Society of Maint Reliability Professional for Certification as a Maint Reliability Professional CMRP |
|
Certified Plant Maintenance Mgr Exam (5560296)
|
$650 |
$700 |
| In conjunction with the World Class Reliability course, participants have the opportunity to obtain the Certified Plant Maintenance Manager (CPMM) certification from the Association for Facilities Engineering (AFE). Certification is achieved by successfully completing the Certified Plant Maintenance Manager (CPMM) Exam. |
|
Intro to Networks for Mgrs & Supervisors (3260408)
|
$1775 |
$1875 |
| Do you speak Geek? If your IT manager said, The LAN is up but we still cant access the net because the DNS server crashed. Would you have any idea what was going on? Intro to Networks/Security for Managers and Supervisors is a 6-day course designed for non-technical management personnel who must interact with their technical staff. The course introduces the basic terms and functions of networks. Hands-on lab activities help to reinforce what you have learned.
Lectures will discuss the data flow from an internal desktop computer inside the organization to an external server. Emphasis will be placed on the resources required to adequately secure those communications. Practical examples will be used to illustrate common threats. The ramifications of failing to secure your network resources will be examined through a case study presentation. |
|
Supervising Business Mail Entry Function (1760104)
|
$1750 |
$1850 |
| The course provides a comprehensive overview for any Business Mail Entry Supervisors or other EAS employees who supervise clerks who accept business mailings. The student will receive training in the administration, acceptance, verification of FCM, STD mail, Periodicals mailings,MERLIN, and daily operations. |
|
Sys Thinking: Building a 21st Century Org (1160148)
|
$1225 |
$1300 |
| Based on the concepts presented in The Fifth Discipline, by Senge, we will explore five key concepts that can guide your work in a rapidly changing world: Systems Thinking, Personal Mastery, Mental Models, Share Vision, and Team Learning. We will examine ways to improve continuous process improvement and analyze team roles. Participants in the course will develop a tactical guide for moving forward in the ''real world.'' |
|
World Class Reliability (WCR) (5560295)
|
$2525 |
$2675 |
| This course provides a systematic method for maintenance management personnel to deveolp, evaluate, and sustain world-class maintenance departments, ensuring reliability that effectively supports the goals and objectives of their organization. The comprehensive workshop format focuses on the development of essential maintenance processes coupled with the managerial skills required to administer a comprehensive, effective maintenance organization. |
Material Handling |
|
Bulk Mail Conveyor Controls (5566613)
|
$2000 |
$2100 |
| Provides training in the relationship between CPU, input modules, output modules, input devices, output devices, and the ladder logic program for the Allen-Bradley SLC 500 family of Programmable Logic Controllers. Emphasizes fault isolation techniques to troubleshoot to the field replaceable unit utilizing RSLogix500 on-line monitoring of the PLC and diagnostic test equipment. How to install, configure, and calibrate the Allen-Bradley Smart Motor Controller and VFD in a remote I/O environment. |
|
ControlNet Communications (5560431)
|
$900 |
$950 |
| This course provides the skills needed to design, configure, and troubleshoot ControlNet networks. The course will utilize RSNetworx for ControlNet software, RSLinx software and RSLogix 5000 software. |
|
DeviceNet Communications (5560430)
|
$875 |
$925 |
| This course provides the skills needed to design, configure, and troubleshoot DeviceNet networks. The course will utilize RSNetworx for DeviceNet software and RSLinx Software. |
|
Maint & Tblshooting AB Logix500 Ctrl Sys (5560432)
|
$2075 |
$2200 |
| Provides the skills essential to maintaining quality performance of Allen-Bradley Logix500 control systems, and restoring malfunctioning platforms to operational status with minimal down time and resources. Techniques also include optimizing or modifying system performance to accommodate the variations between facility necessities. |
|
Maint & Troubleshooting AB Logix5000 (5560342)
|
$2275 |
$2400 |
| Comprehensive training which encompasses the ControlLogix Platform, a collection of Allen-Bradley's most powerful and flexible Programmable Logic Controllers. The course provides detailed hands-on training, to include:
-Hardware specifications, requirements, installation, configuration, maintenance, and troubleshooting.
-Software operation, management, modification, and analysis.
-Communications operation, management, and diagnosis.
The course provides students with the skills essential to maintaining, restoring, optizing, and modifying Allen-Bradley ControlLogix or Allen-Bradley CompactLogix systems with minimal down time and resources. |
Miscellaneous |
|
BULK CONVEYORS (5550100)
|
Call |
Call
|
| Enter your short description here |
|
Bulk Conveyors (5550101)
|
Call |
Call
|
| Enter your short description here |
|
Certified Maint Reliability Prof exam (5560309)
|
$650 |
$700 |
| Exam for Society of Maint Reliability Professional for Certification as a Maint Reliability Professional CMRP |
|
ELECT SWITCHGEAR MAINT CONTRACT ADMIN (5552400)
|
Call |
Call
|
| Enter your short description here |
|
FLATS CANCELER/STACKER MODEL 15 (5656600)
*
|
Call |
Call
|
| Enter your short description here |
|
MAINT SAFETY AWARENESS EXEMPTION EXAM (5651001)
*
|
Call |
Call
|
| Enter your short description here |
|
Teamwork Through Leadership (1160156)
|
$100 |
$125 |
| This program is designed to refine courage and creativity in your organization's environment with principles ranging from Conflict Resolution to custom designed Change Management. Let our experienced Certified Training Facilitators, based on your needs, help design strategies to implement in your organization. We frame the activities in context of your mission to affect the desired change within your group or organization.
For all external customers an NCED waiver must be signed on property.
Course fee is set at minimum regardless of final session length. Session can range from greater than 4 hours to less than or equal to 8 hours. |
|
Teamwork and Communication (1660101)
|
$75 |
$100 |
| This program is designed to refine courage and creativity in your organization's environment with principles ranging from Conflict Resolution to custom designed Change Management. Let our experienced Certified Training Facilitators, based on your needs, help design strategies to implement in your organization. We frame the activities in context of your mission to affect the desired change within your group or organization.
For all external customers an NCED waiver must be signed on property.
Course fee is set at minimum regardless of final session length. Session can range from greater than 1 hour to less than or equal to 4 hours. |
Network Infrastructure |
|
A+ Computer Fundamentals (3260143)
|
$1225 |
$1300 |
| This course uses CompTIA A+ training materials to prepare the student with the knowledge and skills necessary to become proficient in core computer principles for both hardware components and operating systems. This course is beneficial for any postal maintenance or information systems personnel involved with the installation, upgrade, and troubleshooting of microcomputer (PC) hardware and operating system software. |
|
Intro to Networks for Mgrs & Supervisors (3260408)
|
$1775 |
$1875 |
| Do you speak Geek? If your IT manager said, The LAN is up but we still cant access the net because the DNS server crashed. Would you have any idea what was going on? Intro to Networks/Security for Managers and Supervisors is a 6-day course designed for non-technical management personnel who must interact with their technical staff. The course introduces the basic terms and functions of networks. Hands-on lab activities help to reinforce what you have learned.
Lectures will discuss the data flow from an internal desktop computer inside the organization to an external server. Emphasis will be placed on the resources required to adequately secure those communications. Practical examples will be used to illustrate common threats. The ramifications of failing to secure your network resources will be examined through a case study presentation. |
|
LINUX Fundamentals (5560281)
|
$1950 |
$2050 |
| This course is designed to provide the skills needed to gain a thorough understanding of the installation, maintenance and troubleshooting procedures required to administer the LINUX Operating System environment. |
|
MPI Cabling - Copper and Fiber Optic (5560439)
|
$2175 |
$2275 |
| At the current life-cycle stage of the Mail Processing Infrastructure (MPI) network, the one year warranty on the cabling installation performed under the contract has expired. The benefit of having trained staff provides sites with the necessary skilled maintenance personnel to make timely and reliable repairs to the current MPI cabling and perform retrofits that support the future growth of the MPI.
According to MMO 086-08: Work performed on the infrastructure fiber or copper cabling and related components shall only be performed by technicians who have successfully completed NCED CAT-6 training, or possess CAT-6 certification. Sites not possessing personnel with either of these requirements are encouraged to seek infrastructure installation services from outside service providers. |
|
MPI Cabling - E-learning Prereq-WBT (5660105)
|
Call |
Call
|
| This course is a pre-requisite for the MPI Cabling Combined Copper and Fiber Optic resident course. The USPS relies on the (MPI) to provide timely, reliable and accurate mail processing. The physical growth and convergence of new equipment and technology into the (MPI) network is making it increasingly important for field technicians to have the knowledge of cabling components and the skills necessary to maintain the system. Refer to MMO 086-08 |
|
Network Troubleshooting Basics (5560227)
|
$925 |
$975 |
| Network Troubleshooting Basics is specifically designed for individuals with little or no networking experience that want hands-on experience identifying network problems, evaluating solutions and making repairs.
This course uses several common operating systems: Windows 2000 and Windows XP. Participants will use a network map, ping utility, check software configurations, use cable testers and identify hardware problems. Recommended Prerequisite: A+ Computer Fundamentals 32601-43 |
|
Network+ (5560167)
|
$1950 |
$2050 |
| This course uses CompTIA Network+ training materials to introduce the student to networking principles and lays the foundation for core networking concepts. The program is very beneficial for any postal maintenance or information systems personnel involved with network installation, maintenance, and troubleshooting.
This course is complementary to NTB 5560227 which provides more hands-on training identifying network problems, evaluating solutions and making repairs.
Recommended Prerequisite: A+ Computer Fundamentals 3260143 |
Operations and In-Plant Support |
|
Soniks Overview (5120136)
*
|
Call |
Call
|
| Enter your short description here |
Parcels |
|
APPS Mechanical Sys Delta Course Part 2 (5560435)
|
$2525 |
$2675 |
| This course is for those students who have successfully completed the APPS Mechanical Systems Course 55652-50 (Inactive) and who are required to attend APPS Phase 3 55604-16 training. |
Programmable Controllers |
|
Bulk Mail Conveyor Controls (5566613)
|
$2000 |
$2100 |
| Provides training in the relationship between CPU, input modules, output modules, input devices, output devices, and the ladder logic program for the Allen-Bradley SLC 500 family of Programmable Logic Controllers. Emphasizes fault isolation techniques to troubleshoot to the field replaceable unit utilizing RSLogix500 on-line monitoring of the PLC and diagnostic test equipment. How to install, configure, and calibrate the Allen-Bradley Smart Motor Controller and VFD in a remote I/O environment. |
|
ControlNet Communications (5560431)
|
$900 |
$950 |
| This course provides the skills needed to design, configure, and troubleshoot ControlNet networks. The course will utilize RSNetworx for ControlNet software, RSLinx software and RSLogix 5000 software. |
|
DeviceNet Communications (5560430)
|
$875 |
$925 |
| This course provides the skills needed to design, configure, and troubleshoot DeviceNet networks. The course will utilize RSNetworx for DeviceNet software and RSLinx Software. |
|
Maint & Tblshooting AB Logix500 Ctrl Sys (5560432)
|
$2075 |
$2200 |
| Provides the skills essential to maintaining quality performance of Allen-Bradley Logix500 control systems, and restoring malfunctioning platforms to operational status with minimal down time and resources. Techniques also include optimizing or modifying system performance to accommodate the variations between facility necessities. |
|
Maint & Troubleshooting AB Logix5000 (5560342)
|
$2275 |
$2400 |
| Comprehensive training which encompasses the ControlLogix Platform, a collection of Allen-Bradley's most powerful and flexible Programmable Logic Controllers. The course provides detailed hands-on training, to include:
-Hardware specifications, requirements, installation, configuration, maintenance, and troubleshooting.
-Software operation, management, modification, and analysis.
-Communications operation, management, and diagnosis.
The course provides students with the skills essential to maintaining, restoring, optizing, and modifying Allen-Bradley ControlLogix or Allen-Bradley CompactLogix systems with minimal down time and resources. |
Safety |
|
Arc Flash Safety Training-XTNL (SAP0310)
|
Call |
Call
|
| Course Description:
This External (XTNL) Electrical Arc Flash course is developed for and delivered to (non-Postal) personnel. Electrical Arc Flash training is a requirement of the NFPA 70E Standards guide, for all employees that work on or around electrical equipment which could potentially result in an electrical shock. These requirements are enforced by the Occupational safety and Health Administration (OSHA). Companies across the nation are providing this training to their employees to insure a safe working environment and to assure OSHA compliance. |
|
Electrical Standards (OSHA 3095) (1960184)
|
$975 |
$1025 |
| This course is designed to provide the student with a survey of OSHA's electrical
standards and the hazards associated with electrical installations and equipment.
Topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, hazardous locations, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA inspection procedures. Hands-on training is provided using various types of electrical testing equipment. 2.5 CEUs; 3.5 CMs |
|
Industrial Hygiene (19Q0107)
|
$875 |
$925 |
| The Industrial Hygiene course is designed to provide the student with the ability to anticipate, recognize, evaluate and control environmental factors or stresses in the workplace. This course explores basic concepts of industrial hygiene and occupational health hazards. Physical, chemical and radiological health stresses of the individual environment: sources, effects, measurement, evaluation of control and exposures are studied. This course will cover the general concepts and principles of industrial hygiene with direct application to workplace environments. Direct topic coverage will include: common health hazards, air contaminates, biological hazards, an introduction to air quality, noise, respiratory control, ventilation, hygiene sampling equipment/techniques, and related standards. |
|
Life Safety, Fire Prev & Elec Safety (19Q0106)
|
$750 |
$800 |
| This course provides an overview of life safety codes, fire protection, and electrical safety. It covers fundamental requirements, Postal requirements, and includes case studies and practical exercises. |
|
Machinery and Machine Guarding Stand (1960185)
|
$1025 |
$1100 |
| This course will introduce students to various types of common machinery and related
safety standards. Students will be able to recognize hazards created by
points of operation, rotating parts, flying chips and sparks, and alternatives to
achieve abatement. 2.5 CEUs; 3.5 CMs |
|
OSHA 501 (1960183)
|
$1025 |
$1100 |
| This course is designed to present detailed information on how the
provisions of the OSH Act may be implemented in the workplace. Rights and responsibilities under the OSH Act, the appeals process, and record keeping are covered. OSHA's general industry standards and an overview of the requirements of the most frequently referenced standards will also be addressed. Upon successful completion of this course, graduates are authorized to conduct both a 10-hour and 30-hour Voluntary Compliance course and to issue cards to participants certifying course completion. |
|
OSHA General Industry Outreach Training (1960111)
|
$925 |
$975 |
| The course presents detailed information on how the provisions of the Occupational Safety and Health Act (OSHA) may be implemented in the workplace. Content includes
Employee rights and responsibilities
Appeals process
Recordkeeping
Introduction to OSHA's General Industry Standard (29 CFR 1910)
Postal Employees Safety Enhancement Act (PESEA) |
|
Performing Safety Inspections (19Q0104)
|
$725 |
$775 |
| The Performing Safety Inspections class is designed to teach Postal Safety personnel how to conduct internal safety inspections in USPS facilities. Students are taught the USPS inspection process using the tools available from the Safety Toolkit. Mock facility inspections will be conducted. The students will go through the actual inspection process from start to finish with a final inspection report and recommended corrective actions being created.
In addition to USPS inspection policies, the formal OSHA inspection process will be taught which will allow students to understand what to expect should OSHA Compliance Officers come to a USPS facility. |
|
Required Written Programs (19Q0108)
|
$475 |
$500 |
| Course focuses on the 10 OSHA-required written programs and will cover program overview,
OSHA standard, Postal policy and guidelines, requirements, program implementation, and
other key components. For more information contact the Environmental Team at 405-366-4390. |
|
Safety Performance Management (19Q0119)
|
$475 |
$500 |
| This course will provide an overview of USPS safety philosophy and programs and policies,
along with basic OSHA regulations and requirements. The course is designed to provide the
participant with a full scope of knowledge and experience of both the profession and
internal safety and health programs, policies, and resources. For more information contact the Environmental Team at 405-366-4390. |
Security |
|
Intro to Networks for Mgrs & Supervisors (3260408)
|
$1775 |
$1875 |
| Do you speak Geek? If your IT manager said, The LAN is up but we still cant access the net because the DNS server crashed. Would you have any idea what was going on? Intro to Networks/Security for Managers and Supervisors is a 6-day course designed for non-technical management personnel who must interact with their technical staff. The course introduces the basic terms and functions of networks. Hands-on lab activities help to reinforce what you have learned.
Lectures will discuss the data flow from an internal desktop computer inside the organization to an external server. Emphasis will be placed on the resources required to adequately secure those communications. Practical examples will be used to illustrate common threats. The ramifications of failing to secure your network resources will be examined through a case study presentation. |
|
Security Equipment (5560608)
|
$1475 |
$1550 |
| Enter your short description here |
|
Security Equipment Advanced (5560609)
|
$2925 |
$3075 |
| Enter your short description here |
Software Systems and Applications |
|
Cimplicity Basics (5560259)
|
$1925 |
$2025 |
| An introduction to basic Cimplicity HMI software. |
|
LINUX Fundamentals (5560281)
|
$1950 |
$2050 |
| This course is designed to provide the skills needed to gain a thorough understanding of the installation, maintenance and troubleshooting procedures required to administer the LINUX Operating System environment. |
|
Microsoft Config and Troubleshooting (3260410)
|
$1825 |
$1925 |
| This course provides students with the knowledge and hands-on skills necessary to install, configure, troubleshoot, restore and recover Microsoft server and client computers. This course also provides extensive daily labs in the areas mentioned above on Windows NT Server, 2000 Professional, 2000 Advanced Server, XP Professional and 2003 Enterprise Server utilizing built-in and 3rd party applications. The labs, lectures and activities are based on the U.S. Postal Service implementation of these devices and technologies in relation to administration and mail processing. The course format provides anywhere from 2-3 hours of lecture, 4-5 hours of labs and 1 hour of self-study daily. |
|
Office XP Survival Skills (1560343)
|
$1450 |
$1525 |
| The six day Office XP Survival Skills course combines lecture with hands-on workshops. The supervised workshops will afford each attendee the opportunity to reinforce information presented during each lecture. Microsoft Office XP programs presented are Windows XP, Word, Excel, PowerPoint and Outlook. Other topic areas include Internet access and WinZip. The course will concentrate on the needs of a business user who wishes to acquire software skills or become more proficient and effective in the use of Microsoft Office XP. |
|
Oracle SQL and SQL Plus Foundation (3260136)
|
$2050 |
$2175 |
| This is a REAL introductory course that answers your database questions that you were too afraid to ask - in public. The course begins with basic fundamentals like terminology and why use a database, steps you up to creating database objects and storing, retrieving, and manipulating data in a relational database using SQL and even touches on security. |
